Hybrid polymer based montage adhesive with extreme high-grab properties and final strenght

PROPERTIES

• Thanks to high-grap property enables to bond construction materials without mechanical fixing.
• Very strong adhesion on wood, glass, concrete, tile, brick, plaster, some plastics and metal.
• Absorbs vibrations due to its elasticity and therefore usable in moving building elements.
• Isocyanate free and cures bubble free.
• Usable in damp substrates.
• Resistant to weather conditions and humidity.

FIELDS OF APPLICATION

• Fixing baseboard, door fillers, window and door sills,
• Bonding polystyrene cornices and curtain tracks.
• Bonding metal, plastic and wooden building accessories.
• Installing heat and sound insulation boards.
• Bonding mirrors.

COLOR OPTIONS

White

PACKING

• 280ml cartridges x 12 pcs in cartons

TECHNICAL DATA

• Density: 1,48 gr/ml
• Application temperature: 5C to 35C
• Open-time: 10-25 min
• Curing time: 3mm/day
• Shore A Hardness: 55 +/- 5
• Shrinkage: None
• %100 Modulus: 1,8 N/mm2
• Tensile strength % (ISO 8339) approx. 2,8 N/mm2
• Elongation on Break (ISO 8339) > %200
• Temperature Resistance -40C to 100C

High viscosity cyanoacrylate adhesive with extremely fast cure used with an aerosol activator

PROPERTIES

Two-component adhesive with non-slump cyanoacrylate and solvent-based activator.
Enables a very strong bond within 5 seconds.
Can be used on vertical and porous substrates

FIELDS OF APPLICATION

Bonding wood elements, MDF, rubber, leather, and some plastics.
DIY bonding where fast adhesion is desired

PACKING

200 ml
400 ml

TECHNICAL DATA

Chemical composition: cyanoacrylate adhesive and solvent-based amine accelerator
Viscosity @25C: 1500 cps
Thermal stability: Between -15C and +70C
Density: 1,05 gr/ml
Carrier solvent: Hegzane

Super Glue

Explanation

it is a fast curing ethyl cyanoacrylate adhesive with viscosity.

Application

Ideal for gluing plastic, rubber, metal.

HARDENING SPEED

Plastic: 10 - 40 seconds
Rubber: 10 - 40 seconds
Metal : 10 - 40 seconds
Tree: 10 - 40 seconds
(22 , 50% relative humidity ASTM D1002, 0.1N/mm2 tensile strength)

General features

Uncured monomer
The Main Component
Appearance
Specific gravity, 25
viscosity 25 (CPS)
Capillary Viscometers
#200 P378@20
The Temperature of Ignition
Shelf Life (20) months
(Stored in a cool and dry place, with the lid closed, away from direct sunlight)

Ethyl Cyanoacrylate
Clean liquid Jul.
1.04
1.5-5.0 CPS

>80
12

Healing Adhesive
Filling The Gap
Tensile Strength
Steel - Steel ASTM D-2095
Tensile Shear Resistance
Steel / Steel ASTM D-1002
Processing Temperature December
Full Drying Time

10~20 N/mm2

Product Dimensions

20g,50g,500g,1kg,2kg,20kg,200kg

security

It is irritating, Avoid contact with eyes and skin, it glues the skin in seconds. Within 15 minutes in case of contact with the eye
wash it off with plenty of water and consult a doctor.Use it in well-ventilated places. Avoid contact with clothing may cause too strong heat.

Application

0.04mm
10~20 N/mm2

-55 ~ 82
24 hours

The surfaces to be glued must be clean and completely free of grease.Jul.
When using Aliri adhesive, treated by ISTWELD Debonder AD-1 or acetone can be used.
If the adhesion time is too long due to large gaps or relative humidity, the ISTWELD Accelerator AF-1 can be used.
If the pores on the surface are too many, the better viscosity type ones should be used.
Plastics such as PE, PP, Silicone Rubber, ABS, Thpr are difficult to glue.
In these cases, EPDM's Adhesion, ISTWELD Primer (AP-1) should be applied first,
then ISTWELD super glue should be applied.

CHEMICAL DOWEL

Polyester-based adhesive that provides heavy load resistance in all construction materials.

PROPERTIES

Use for medium-high loads, static or quasi-static,
Working life of 50 and/or 100 years,
Dry, wet and flooded holes,
Temperature range: from -40ºC to +80ºC (long term maximum temperature +50ºC),
Compatible with several building materials including perforated brick.

FIELDS OF APPLICATION

Masonry support,
Handrails,
Fences,
Balcony parapets,
Road signs,
Pipe systems,
Lighting systems,
Canopies,
Safety barriers,
Racking, machinery,
Ventilation systems.

PACKING

300 ml cartridge, package of 20

TECHNICAL DATA

Viscosity Temperature 22°C - 120000 – 200000 cP
Service temperature - -40°C - +80°C
Compressive strength EN 12190 - -R2 Class 82N/mm²
Chloride ion content EN 1015-17 - 0.0056%
Glass transition temperature (Tg) EN 12614 - 74°C
Fire response Method EN 13501-1 - Euroclass E